Lighting Choices to Save You Money
Written by marshall
Light your home using the same amount of light for less money. By replacing your home’s five most frequently used light fixtures or bulbs with models that have earned the ENERGY STAR, you can save $75 each year. New lighting standards took effect in 2012, and money-saving options such as halogen incandescent, CFL, and LED lightbulbs are available today. For high-quality products with the greatest energy savings, choose bulbs that have earned the ENERGY STAR.
NEW LIGHTBULBS: WHAT’S THE DIFFERENCE?
Traditional incandescent bulbs use a lot of energy to produce light and are no longer manufactured.
90% of the energy is given off as heat
That lost energy is money we are throwing away
Newer energy-saving lightbulbs provide the choices in colors and light levels you’ve come to expect. The new lights are also much more efficient — so they save you money.
WHAT ARE MY LIGHTING CHOICES?
Three of the most common energy-efficient lighting types include halogen incandescents, CFLs, and LEDs. You can find these in most hardware and home improvement stores.
Halogen incandescents have a capsule inside that holds gas around a filament to increase bulb efficiency. They are available in a wide range of shapes and colors, and they can be used with dimmers. Halogen incandescent bulbs meet the federal minimum energy efficiency standard, but there are now many more efficient options to meet your lighting needs.
Compact fluorescent lamps (CFLs) are simply curly versions of the long tube fluorescent lights you may already have in a kitchen or garage. Because they use less electricity than traditional incandescents, typical CFLs can pay for themselves in less than nine months, and then start saving you money each month. An ENERGY STAR-qualified CFL uses about one-fourth the energy and lasts ten times longer than a comparable traditional incandescent bulb that puts out the same amount of light. A CFL uses about one-third the energy of a halogen incandescent.
CFL bulbs are available in a range of light colors, including warm (white to yellow) tones that were not as available when first introduced. Some are encased in a cover to further diffuse the light and provide a similar shape to the bulbs you are replacing. If you are looking for a dimmable bulb, check the package to make sure you purchase a CFL with that feature.
Fluorescent bulbs contain a small amount of mercury, and they should always be recycled at the end of their lifespan. Many retailers recycle CFLs for free. See EPA’s website for more information.
The light emitting diode (LED) are a type of solid-state lighting — semiconductors that convert electricity into light. Although once known mainly for indicator and traffic lights, LEDs in white light, general illumination applications are one of today’s most energy-efficient and rapidly-developing technologies.ENERGY STAR-qualified LEDs use only 20%–25% of the energy and last up to 25 times longer than the traditional incandescent bulbs they replace. LEDs use 25%–30% of the energy and last 8 to 25 times longer than halogen incandescent.
LED bulbs are currently available in many products such as replacements for 40W, 60W, and 75W traditional incandescents, reflector bulbs often used in recessed fixtures, and small track lights. While LEDs are more expensive at this early stage, they still save money because they last a long time and have very low energy use. As with other electronics, prices are expected to come down as more products enter the market.
This article is from the US Department of Energy and is Public Domain
Latest from marshall
More in this category:
FIVE STEPS TO ENERGY SAVINGS
Our First Meeting we will explore:
- Your expectations
- Different Technologies
- Available Products
- Where you are in the process.
- Next Step
We will begin by surveying and evaluating your
existing system and discussing your hours of
operation and previous electric bills so that we
can determine your cost per kWh.
After the initial survey, we will return to discuss the following:
- Our proposed upgrades
- Energy savings
- Lighting expectations
- Available incentives and rebates
- Funding options
With Teems, this is truly a turnkey experience. Once we’ve reached an agreement, Teems will begin:
- Project management
- Installation process
- Disposal and recycling of existing equipment
- And so much more
As soon as your project is complete, you will begin saving on
your energy costs!
There are many benefits to completing an energy efficiency project with Teems. Some of the highlights are:
- Savings evident on your next electric bill
- Increased production
- Higher light quality
Your next bill is guaranteed to show the savings in dollar signs!